SA 100MR

SA 100MR

  • Selectable-Range Sensor
  • +/- 15 VDC Operation
  • Low Cost Flexibility
Download Spec Sheet

The Columbia Model SA-100MR offers the superior performance of force balance technology with the flexibility of multiple operating ranges for DC and low frequency measurements. The accelerometer is self-contained and provides a high level, low impedance output. No signal conditioning is required in most applications.

The full range for Model SA-100MR is specified when the accelerometer is ordered. The range may then be adjusted from 0.05 to 1 times the full range by means of an external resistor. The selected range always corresponds to an output of ±7.5 volts. The noise floor remains constant and does not increase as the scale factor is increased, thereby achieving the optimum signal-to-noise ratio for any range selected.

Exports of accelerometers from the United States are subject to the licensing requirements of the Export Administration Regulations (EAR) and/or the International Traffic in Arms Regulations (ITAR).


Output Impedance 100 Ohms Typical
Ranges Available +1G, +5G, +10G, +50G
Output Voltage +7.5 Volts Adjustable From F.R. to 10% of F.R.
Excitation +12 VDC to +15 VDC 8 mA Standby, 20 mA @ F.R.
Sensitive Axis Alignment Better than 0.25 Deg
Scale Factor Tolerance +1%
Scale Factor Temp Coefficient +0.02% / Deg C
Zero Bias +0.15% F.R.
Null Temp Sensitivity 0.00015% F.R. / Deg C
Product Lines
Web Statistics