Home | Piezoelectric Accelerometers | Special Application Piezoelectric Accelerometers
- Calibration Traceable to NIST
- High Resonance Frequency
- 10-32 Removable Stud
- Case Grounded
- Top or Side Connector
Models VS-102 and VS-507 are Piezoelectric Accelerometers designed for calibration of back-to-back working standards and reference standards built into shakers. These sensors are optimized for stability and a nominally flat frequency response and are available in two convenient sizes and sensitivities.
Both sensors are configured with a rugged stainless steel housing and a removable 10-32 mounting stud. The accelerometers are supplied with a 10" low noise cable assembly and certificate of calibration traceable to NIST. Consult the factory for customized versions of these sensors.
At +75 Deg F, 10g Peak, 100Hz; Lower Frequency Limit is Determined by Associated Electronics
Referenced to Sensitivity @ 100 Hz.
With Connector Protected or Sealed, Unit is Epoxy Sealed
|Charge Sensitivity||1.5 pC/g|
|Frequency Linearity||+/-0.5% Max, 5 Hz To 1,000 Hz, +/-2% Max, 1 Hz To 3,000 Hz, +/-5% Max., 5 Hz to 10,000 Hz|
|Resonant Frequency||50 KHz, Nom.|
|Amplitude Linearity||+/-0.5%, 0.5 g to 20 g, +/-1.0%, 20 g to 100 g, +/-1.5%, 100 g to 500 g|
|Capacitance||85 pF 525 +/-50 pF|
|Insulation Resistance||20,000 M Ohm Min, 50 VDC Test|
|Isolation Resistance||0 (Case Ground)|