6065

6065

  • Vibration & Shock
  • Sensitivities 0.5 pC/G & 1.5 pC/g
  • Frequency Response to 20KHz
  • Low Base Strain Sensitivity
  • Detachable Micro-Cable Assy.
  • Stud or Adhesive Mounting
Download Spec Sheet

The Model 6064 and 6066 Piezoelectric Accelerometers are excellent general-purpose shock and vibration measurement sensors, where small size and low mass, permits their use on small, lightweight specimens. They are designed for the measurement of wideband, moderate to high-level shock and vibration. The sensors incorporate an inverted shear crystal-mass assembly within a stainless steel body to provide a reliable sensor that is insensitive to environmental inputs such as base bending and thermal transients.

The sensors incorporate an inverted shear crystal-mass assembly within a stainless steel body to provide reliable sensors that are insensitive to environmental inputs such as base bending and thermal transients. Signal ground is connected to the outer case of the units. These accelerometers are supplied with Columbia's exclusive micro-miniature detachable cable and connector assemblies. High temperature units will operate in environments up to +500 Deg F.

Consult the factory for customized versions of these sensors.

Notes:
At +75 Deg F, 10g Peak, 100Hz; Lower Frequency Limit is Determined by Associated Electronics
Referenced to Sensitivity @ 100 Hz.
With Connector Protected or Sealed, Unit is Epoxy Sealed.

Specifications

Charge Sensitivity 1.5 +/-0.35 pC/g
Frequency Linearity +/-5% Max 2 Hz To 20,000 Hz
Resonant Frequency 50 KHz, Nom.
Amplitude Linearity +/-1.0% (BFSL) / 5,000
Capacitance 350 +/-60 pF
Insulation Resistence 20,000 M Ohm Min, 50 VDC Test
Isolation Resistance 0 (Case Grounded)
Transverse Sensitivity 5% Max
Product Lines
Web Statistics