8410 M100

8410 M100

  • Vibration & Shock
  • Low Impedance Output
  • Choice of Sensitivities
  • Case Grounded
  • Hermetically Sealed
Download Spec Sheet

Columbia Series 8410 Piezoelectric Accelerometers are completely self-contained vibration measuring systems having a built-in amplifier within the housing. They are designed for the measurement of low level, broadband frequency vibrations.

The Series 8410 incorporates a hybrid electronic assembly within a rugged stainless steel body to enhance its operation in humid and dirty environments. Internal electrical damping limits the resonant Q to less than 20 dB. Signal ground is connected to the outer case of the unit. Low impedance output of 100 ohms or less allows operation directly into standard readout equipment without auxiliary signal conditioning, and is capable of driving up to 1,000 feet of shielded cable.

Consult the factory for customized versions of this sensor.

At +75 Deg F, 10g Peak, 100Hz; Power Supply 2 To 10 mA DC Constant Current with 20 To 30 VDC Compliance
Referenced to Sensitivity @ 100 Hz.
With Connector Protected or Sealed, Unit is Hermetically Sealed.


Frequency Linearity +/-10% Max, 1 Hz To 7,500 Hz, +/-5% Max, 3 Hz To 5,000 Hz
Resonant Frequency 25KHz, Min.
Amplitude Linearity +/-1.0% (BFSL) / 50 g
Avg Temp Coeff of Sensitivity 0.05% / Deg F
Transverse Sensitivity 5% Max, Typical
Voltage Sensitivity 50 mv/g +/-5% 100 mv/g +/-5%
Range +/-100 g Peak +/-50 g Peak
Electrical Noise 0.02 x 10-3 g Equiv., Nom.
Product Lines
Web Statistics