• Vibration & Shock
  • Low Impedance Output
  • Sensitivity 100 mV/g
  • Small Size, Lightweight (29 Gm)
  • Electrically Isolated
  • Hermetically Sealed
Download Spec Sheet

The Model 8303 Piezoelectric Accelerometer is a completely self-contained vibration measuring system having a built-in amplifier within the housing. It is designed for the measurement of low to moderate level shock and vibrations.

The sensor incorporates a hybrid electronic assembly within a rugged, welded, double-wall stainless steel body to enhance its operation in humid and dirty environments. The doublewall, electrically isolated construction provides additional isolation from metallic structures, which aids in acquiring accurate, wideband shock and vibration data uncorrupted by electrical ground loop currents. The sensor module is bonded into the outer stainless steel body with a high performance epoxy. Internal electrical damping limits the resonant Q to less than 30 dB. Low impedance output of 100 ohms or less allows operation directly into standard readout equipment without auxiliary signal conditioning, and is capable of driving up to 1,000 feet of shielded cable.

Consult the factory for customized versions of this sensor.

At +75 Deg F, 10g Peak, 100Hz; Power Supply 2 To 10 mA DC Constant Current with 20 To 30 VDC Compliance
Referenced to Sensitivity @ 100 Hz.
With Connector Protected or Sealed, Unit is Hermetically Sealed.


Frequency Linearity +/-10% Max, 1 Hz To 7,000 Hz, +/-5% Max, 2 Hz To 4,000 Hz
Resonant Frequency 20KHz, Nom.
Amplitude Linearity +/-1.0% (BFSL) / 50 g
Transverse Sensitivity 5% Max, Typical
Voltage Sensitivity 10 mv/g +/-5%
Range +/-80 g Peak
Electrical Noise 0.0003 g RMS Equiv., Nom.
Product Lines
Web Statistics