• Vibration & Shock
  • High Capacitance (100 pC/g)
  • Needs No Amplifier
  • Epoxy or Hermetic Seal
  • 10-32 Mounting
Download Spec Sheet

The Models 3029 and 3033 piezoelectric accelerometers exhibit a nominal transfer sensitivity of 100 picoCoulombs/g and may be used without auxiliary signal conditioning to provide an economical and reliable means of vibration measurement. The internal construction of the piezoelectric seismic system ensures that the units have no discernible spurious response to mounting torque, body strains, cable vibration, cable whip, pressure variations and most heat transients.

The Model 3029 is epoxy sealed, and the Model 3033 is hermetically sealed to provide maximum protection against high humidity environments. Signal ground is connected to the outer case of the unit. Both units feature a 10-32 side connector and are provided with a 10" low-noise coaxial cable. High temperature units will operate in environments up to +500 Deg. F.

Consult the factory for customized versions of these sensors.

At +75 Deg F, 10g Peak, 100Hz; Lower Frequency Limit is Determined by Associated Electronics
Referenced to Sensitivity @ 100 Hz.


Charge Sensitivity 100 +/-10 pC/g
Frequency Linearity +/-5% Max 2 Hz To 6,000 Hz
Resonant Frequency 30 KHz, Nom.
Amplitude Linearity +/-1.0% (BFSL) / 500g
Capacitance 8500 +/-100 pF
Insulation Resistance 20,000 M Ohm Min, 50 VDC Test
Isolation Resistance 0 (Case Grounded)
Transverse Sensitivity 5% Max
Product Lines
Web Statistics