facebook

Home | Piezoelectric Accelerometers | Integrated Piezoelectric Accelerometers

8501

  • Vibration & Shock
  • Low Impedance Output
  • Sensitivity 100 mV/g
  • Electrical Isolation
  • Hermetically Sealed

The Model 8501 Piezoelectric Accelerometer is a completely self-contained vibration measuring system having a built-in amplifier within the housing.

It is designed for the measurement of low level, broadband frequency vibrations. This unit incorporates a hybrid electronic assembly within a rugged, welded, double-wall stainless steel body to enhance its operation in humid and dirty environments. The double-wall, electrically isolated construction provides additional isolation from metallic structures, which aids in acquiring accurate, wideband shock and vibration data uncorrupted by electrical ground loop currents. The sensor module is bonded into the outer stainless steel body with a high performance epoxy. Internal electrical damping limits the resonant Q to less than 18 dB. Low impedance output of 100 ohms or less allows operation directly into standard readout equipment without auxiliary signal conditioning, and is capable of driving up to 1,000 feet of shielded cable.

Consult the factory for customized versions of this sensor.

Notes:
At +75 Deg F, 10g Peak, 100Hz; Power Supply 2 To 10 mA DC Constant Current with 18 To 30 VDC Compliance.
Referenced to Sensitivity @ 100 Hz.
With Connector Protected or Sealed, Unit is Hermetically Sealed.

Specifications

Frequency Linearity +/-3% Max, 1 Hz To 7,500 Hz
Resonant Frequency 15KHz, Nom.
Amplitude Linearity +/-1.0% (BFSL) / 50 g
Transverse Sensitivity 5% Max, Typical
Voltage Sensitivity 100 mv/g +/-5%
Range +/-50 g Peak
Electrical Noise 0.5 x 10-3 g Equiv., Nom.