facebook

Home | Piezoelectric Accelerometers | General Purpose Piezoelectric Accelerometers / General Purpose Accelerometers

5004

  • Shock To 100,000 G
  • Sensitivity 0.1 pC/g
  • High Natural Frequency
  • Low Base Strain Sensitivity
  • Electrically Isolated
  • 10-32 Removable Stud

The Models 5004 and 5004-HT Piezoelectric Accelerometers are small, lightweight sensors with very low sensitivity of 0.1 picoCoulomb/g making them excellent selections for extremely high shock levels to 100,000 g. Its natural frequency of 100,000 Hz allows measurement of fast duration shock of 10 microseconds without ringing or distortion.

The units incorporate a shear-plate crystal mass assembly within a stainless steel body to provide an extremely reliable sensor that is virtually insensitive to environmental inputs such as base bending and thermal transients. Ground is electrically isolated from the case for reduced noise pickup. These accelerometers feature a 10-32 top connector and are provided with a 10" low-noise coaxial cable. The Model 5004-HT will operate in environments up to +500 Deg. F.

Consult the factory for customized versions of these sensors.

Notes:
At +75 Deg F, 10g Peak, 100Hz; Lower Frequency Limit is Determined by Associated Electronics
Referenced to Sensitivity @ 100 Hz.
With Connector Protected or Sealed Unit is Epoxy Sealed

Specifications

Charge Sensitivity 0.1 +/-0.5 pC/g
Frequency Linearity +/-5% Max 2 Hz To 20,000 Hz
Resonant Frequency 100 KHz, Nom.
Amplitude Linearity +/-1.0% (BFSL) / 10,000 g
Capacitance 300 +/-60 pF
Insulation Resistance 20,000 M Ohm Min, 50 VDC Test
Isolation Resistance 100M Ohm Min.
Transverse Sensitivity 5% Max